Brick Paver Installation & Edging



Staging of material

Many paver projects will differ depending on gain access to, site conditions, project size and of course, the weather. Cautious consideration should be taken to figure out the time to begin the paver installation.

The foreman or project supervisor must always have the products (sand/ pavers) dispersed around the project site for efficient and simple installations. Paver pallets/bundles should be positioned in a way not to interfere with the paver installation. The proper pallet/bundle placement can make the real job installation easier and quicker by lowering the overall labor of dealing with the product.

Brick paver patterns

Pavers can be put in many different patterns depending upon their shape. Each paver shape will typically have several various hatch patterns that are offered by the manufacturer.

Professionals need to take into factor to consider the traffic weight loads on their paver jobs. In the majority of applications around the world, it has been revealed that pavers laid in a herringbone pattern have carried out properly.

Pavers that are 60 mm (2 - 3/8 in) density are suitable for pedestrian applications. Pavers that are going to be used in industrial or industrial applications need to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a variety of conditions that identify the beginning point of a paver job.

When starting to set up pavers it is best to snap a true straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface of the bed linen sand at the completed elevation of the pavers This will assist as a guide for preserving straight joint lines and will likewise enable the installer to make changes in the alignment of the pavers.

Structures and concrete curbing are usually not straight and ought to not be utilized for establishing straight joint lines. Making use of string lines is important to determine the true straightness of the edge also. As the paver installation advances, the string lines will help decrease the need for little trim pieces.

These will preserve a minimum joint width and allow the bedding and jointing sand to go into in between each paver. Pavers with spacer bars are generally not laid in snug against each other because a string line will offer constant joint spacing.

Installation of brick pavers.

Among the most extensively used methods for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bedding sand. This will give you a real and straight line off which to work. When this row is established, you can continue to work outward into the field with the rest of the pavers. Constantly ensure to occasionally examine your joint lines to make sure they are real and straight. If not, changes to the pavers can be made as you continue installing. Pavers should be installed hand tight. The best method is to place a paver against another one and let it slide down into the bedding sand. Do not kick or tap the pavers into place as this can throw your lines out of true straightness.

When installing pavers on a high grade, they need to be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The best method for setting up pavers on big jobs is to install them mechanically. There are a couple products a contractor ought to consider before installing pavers mechanically:

1.) Mechanical installers are just efficient in installing pavers in particular patterns.

2.) The specialist needs to ensure that the producer is capable of manufacturing and bundling pavers in the wanted pattern on the pallets for simple mechanical installation.

Poor color blending might result in an irregular looking installation. A lot of manufacturers are consistent with color mixing on each package of pavers, however it is the specialist's obligation to ensure proper mixing in the field.

Cutting treatments for brick pavers.

Contractors normally have two ways of cutting pavers. When cutting pavers damp, it will help decrease dust and will lengthen the diamond blades life. The operator of the brick saw ought to always cut the pavers away from the surface area of the paver field when cutting wet, due to the fact that the pavers will develop a slurry that will stain the paver surface.

The brick saw operator should constantly wear the correct security that is needed for running a saw, such as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a significant role in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers tightly together. Especially at the external boundary of the paver application, without an edging restraint, your project is ensured to fail with time.

There are a number of different edging restraints from which specialists can select. Generally made edge restraints are the most typically used by specialists. Produced edging restraints can vary from, plastic edging, steel and aluminum, woods or precast concrete and stone. An edging type that is utilized mainly in industrial and industrial applications is poured-in-place concrete curbs. This edging restraint is typically set up by other contractors.

Edging installation.

When installing your edge restraint, it needs to rest directly on top of the compressed gravel base. The compacted gravel base course need to extend a minimum of 6in beyond the border of the pavers This will supply an appropriate foundation upon which the edging restraint can sit. Produced edging (i.E. Plastic, steel or aluminum) need to be securely anchored into the compressed gravel base( consult the maker's literature for the recommended spacing of the spikes). There are some edging restraints that will extend much deeper into the gravel base or beyond the base course (i.E. Timbers or poured-in-place curbs ). Edging restraints should never ever be put straight on top of the bedding sand. This might result in the migration of the bedding sand and ultimate lateral movement of the pavers. If there is a possibility of losing bed linen sand between the pavers and the edge restraint, then geo textile material is recommended. When a gap between the pavers and the edging goes beyond 3/8" (10mm), then the space must be filled with cut pavers. All edging applications need to be correctly back filled after they are set up to help offer extra stability.

Compaction of brick pavers.

After installation, the pavers have to be compacted. The entire location that is to be compacted need to be swept clean of any foreign items and particles that can cause scuffing or Paver Installation Boca Raton scratching on the surface of the pavers.

In addition, it is crucial that the very first compaction takes place before any jointing sand has actually been used to the pavers. If jointing sand is applied to the pavers before compaction takes location, this can trigger a bridging issue and will not allow the joints to be totally filled with jointing sand. This can likewise avoid the pavers from being correctly set into the bed linen sand.

When condensing the pavers, it is recommended that you make at least two passes in various instructions throughout the pavers. This will allow the pavers to be correctly embeded in the bed linen sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very crucial to the last efficiency of the pavers. Failure to do proper compaction can result in deformations and pavement failure gradually.


Paver pallets/bundles must be positioned in a way not to interfere with the paver installation. One of the most widely used techniques for the installation of pavers is hand installation of each paver. The operator of the brick saw must constantly cut the pavers away from the surface area of the paver field when cutting wet, due to the truth that the pavers will produce a slurry that will stain the paver surface area. Edging restraints remove lateral motion of the pavers and hold the pavers tightly together. When a gap between the pavers and the edging surpasses 3/8" (10mm), then the area must be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *